INMP522: Ultralow Noise, Low Sensitivity Tolerance PDM Digital Microphone

Overview

InvenSense MEMS Microphone

The INMP522 is a high performance, ultralow noise, low power, digital output, bottom-ported omnidirectional MEMS microphone. The INMP522 has a sensitivity tolerance of ±1 dB from part to part, making it ideal for microphone array and beamforming applications.

The INMP522 consists of a MEMS microphone element and an impedance converter amplifier followed by a fourth-order Σ Δ modulator. The digital interface enables the pulse density modulated (PDM) output of two microphones to be time-multiplexed on a single data line using a single clock. The INMP522 is function-and pin-compatible with the INMP521 and INMP421 microphones, providing an easy upgrade path.

The INMP522 has a very high signal-to-noise ratio (SNR) and common sensitivity of −26 dBFS, making it an excellent choice for far-field applications. The INMP522 has an extended wideband frequency response, resulting in natural sound with high intelligibility. Low current consumption and a sleep mode with less than 2 µA current consumption enables long battery life for portable applications.

The INMP522 is available in a thin 4 mm × 3 mm × 1 mm surface-mount package. It is reflow solder compatible with no sensitivity degradation.

† – 7” Tape and reel to be discontinued. Contact sales@invensense.com for availability.

INMP522 Functional Block Diagram

INMP522 Functional Block Diagram

Applications

  • Smartphones and feature phones
  • Microphone arrays
  • Tablet computers
  • Teleconferencing systems
  • Digital still and video cameras
  • Bluetooth headsets
  • Notebook PCs
  • Security and surveillance

Features and Benefits

  • ±1 dB sensitivity tolerance
  • Small and thin 4 mm × 3 mm × 1 mm surface-mount package
  • Omnidirectional response
  • Very high SNR of 65 dBA
  • Sensitivity of −26 dBFS
  • Extended frequency response from 75 Hz to >20 kHz
  • Low current consumption of 800 µA
  • Sleep mode for extended battery life, <2 µA consumption
  • Acoustic overload point of 116 dB SPL
  • High PSR of −83 dBFS
  • Fourth-order Σ-Δ modulator
  • Digital PDM output
  • Compatible with Sn/Pb and Pb-free solder processes
  • RoHS/WEEE compliant

References

Application Notes (General)

Application Notes (Specific)

Evaluation Board User Guides

Whitepapers

Part # Output Port Location SNR Equivalent
Input Noise
Frequency Response
Maximum SPL Sensitivity @1kHz Sensitivity Tol Package Size Documentation Flex Board Evaluation Board Device
UNITS: (dBA) (dBA) (min - max) +/- dB mm (.pdf) (add to cart) (add to cart) (add to cart)

INMP522
PDM Bottom 65dB 29dB 75Hz - 20kHz 116dB SPL -26 dBFS 1dB 3.00x4.00x1.00 Datasheet

  • Disclaimer


    • InvenSense sensors should not be used or sold in the development, storing, production and utilization of any conventional or mass-destructive weapons or any other weapons or life-threatening applications as well as in any other life-critical applications including but not limited to medical equipment, transportation, aerospace and nuclear instruments, undersea equipment, power plant equipment, disaster prevention and crime prevention equipment. In devices or systems whereby malfunction of these products can be expected to result in personal injury and casualties, InvenSense customers using or selling these products do so at their own risk and agree to keep InvenSense harmless from any consequences. InvenSense reserves the right to make changes to this product, including its circuits and software, in order to improve its design and/or performance, without prior notice. InvenSense makes no warranty, either expressed or implied with respect to any product, and specifically disclaims all other warranties, including warranties for merchantability, non-infringement, and fitness for any particular purpose. For more information go to Terms and Conditions.

The Future of Sensor System on Chip